Five-level Installation, Testing, and Repair Lightning Counter Tester for Sale and Rental 

Five-level Installation, Testing, and Repair Lightning Counter Tester for Sale and Rental

Technical Parameters:

1.  Voltage: DC 900V, 1200V, 1600V three gears

2.  Discharge current >100A/10US

Usage Method for Five-level Installation, Testing, and Repair Lightning Counter Tester for Sale and Rental:

This product has a beautiful appearance and is convenient to carry and use. It replaces the traditional bulky testing equipment and methods, and is highly welcomed by professionals.

1. Charge before use. To ensure charging effectiveness and extend battery life, use the dedicated charger. It takes 3-4 hours to fully charge an empty battery. The red light on the charger indicates charging; the green light indicates charging is complete. Before use, connect the attached ground wire plug at the tail end, and clamp the ground wire clip to the earth.

2. According to the installation height of the counter, appropriately extend the telescopic discharge rod.

3. Press the red button to turn on high voltage for about 1 second. The indicator light will be on (flickering). Then gently tap the connection end between the counter and the arrester for testing.

4. After each tap, the discharge rod tip should be removed from the counter. If repeated testing is needed, you do not need to release the button. After about 1-2 seconds when the indicator light flickers again, you can tap again for testing.

5. Continuous testing may cause the tester to heat up. Please allow appropriate intervals.

6. If the indicator light does not flicker after pressing the button for more than 3 seconds, it indicates that the battery needs charging.

7. Do not disassemble the tester arbitrarily. If the battery capacity significantly drops or charging efficiency is too low, it needs to be replaced. Please purchase a dedicated battery pack from our company.

Note: When the indicator light is on (flickering), no part of the body should touch the electrode part, otherwise there is a risk of electric shock.

3. Product After-sales Service Commitment with Time Limit:

1. We will provide relevant technical training and technical documentation according to customer requirements.

2. If there are quality issues with the product, we offer a one-month free return or replacement, a three-year free warranty, and lifetime maintenance. If there is a contract agreement, it shall be followed.

3. We guarantee to provide guidance within 15 minutes for you to troubleshoot simple equipment faults by yourself.

4. For instruments under 10 kg, we will resolve the fault within two days or provide a new device for temporary use until the damaged device is repaired.