Darui Electric recommends:
Secondary Class Installation, Testing, and Repair Lightning Counter Tester for Sale and Rental Usage Instructions:
1. Please charge before use. To ensure charging effectiveness and extend battery life, use the dedicated charger. It takes about 3-4 hours to fully charge an empty battery. The red light on the charger indicates charging.
2. According to the installation height of the counter, appropriately extend the telescopic discharge rod.
3. For the dedicated grounding wire, insert one end's plug into the jack at the rear of the calibrator, and connect the other end's clip to the ground.
4. Press the red button to turn on high voltage for about 1 second. When the indicator light lights up (with a slight flicker), you can gently click on the connection terminal between the counter and the arrester for testing.
5. After each click, the tip of the discharge rod should be removed from the counter. If repeated testing is needed, do not release the button. Wait for 1-2 seconds until the indicator light flickers again, then click again for testing.
6. Continuous testing may cause the calibrator to heat up. Please allow appropriate intervals to reduce malfunctions and extend battery life.
7. The calibrator output has three levels: high, medium, and low, which can be adjusted via the toggle switch on the head to suit testing different types or brands of counters.
8. If the indicator light does not flicker after pressing the button for more than 3 seconds, the battery needs charging.
9. Do not disassemble the calibrator arbitrarily. If the battery pack capacity significantly decreases or charging efficiency is too low, it needs replacement. Please purchase the dedicated battery pack from our factory.
Secondary Class Installation, Testing, and Repair Lightning Counter Tester for Sale and Rental Technical Features:
The lightning counter calibrator is designed and developed based on the needs of power users. The product has an attractive appearance and is convenient to carry and use.
1. Portable design with small size and light weight;
2. Telescopic electrode can be adjusted in length according to height;
3. Dual AC/DC power supply with built-in rechargeable battery; one full charge can last for half a year;
4. Strong anti-interference capability;
5. Maximum voltage 1500V
Technical Specifications:
Geometric dimensions: φ36×375, head is φ50×100,
Weight: 780 grams.
Power: DC6V, using four No.1 batteries can provide more than 2000 discharge tests. If the power is
insufficient, charging time will be extended. Unscrew the back cover to replace the batteries.
Output voltage: 800～1000V.
Note: The above information and technical parameters are compiled and released by Yangzhou Darui Electric Co., Ltd.
