Desktop|中文
Home About Us Products + News Center Technical Articles Messages Contact Us

Product Details

全自动Dielectric Loss Tester-扬州达瑞

Lightning Counter Tester Price - Yangzhou Darui

Published: 2024-07-01 12:36:19

Views: 2922

Category: Lightning Counter Calibrator

Product Description
Lightning Counter Tester Price 

Darui Electric recommends:

Lightning Counter Tester Price Product Features:

1. Portable design, small size and light weight

2. Telescopic electrode can be adjusted for height and length

3. Dual AC/DC power supply, built-in rechargeable battery, one charge can last for half a year

4. Strong anti-interference capability

5. Maximum voltage of 1500V



Usage Instructions:



1. Please charge before use. To ensure charging effectiveness and extend battery life, use the dedicated charger. It takes about 3-4 hours to fully charge an empty battery. The red light on the charger indicates charging; the green light indicates full charge.

2. Based on the installation height of the counter, properly extend the telescopic discharge rod.

3. For the dedicated grounding wire, insert one end's plug into the jack at the rear of the calibrator, and connect the other end's clip to the earth ground.

4. Press the red button to activate high voltage for about 1 second, the indicator light will illuminate (flickering), then gently tap the connection point between the counter and the lightning arrester for testing.



Keywords: Lightning Counter Calibrator, Lightning Counter Calibrator, Lightning Counter Calibrator

5. After each tap, the discharge rod tip should be moved away from the counter. For repeated tests, do not release the button; wait 1-2 seconds until the indicator light flickers again, then tap again for testing.

6. Continuous testing may cause the calibrator to heat up; please allow appropriate intervals to reduce malfunctions and extend battery life.

7. The calibrator output has three levels: high, medium, and low, adjustable via the toggle switch on the head to suit testing different types or brands of counters.

8. If the indicator light does not flicker after pressing the button for more than 3 seconds, the battery needs charging.

9. Do not disassemble the calibrator arbitrarily. If the battery capacity significantly drops or charging efficiency is too low, replace it; please purchase the dedicated battery pack from our company.




Note: The above information and technical parameters are compiled and released by Yangzhou Darui Electric Co., Ltd.
WeChat QR Code
💬
💬 Message

Hello! Have you found what you need? Contact us directly online!

Leave a Message for Consultation
Yangzhou Darui Electric Co., Ltd.
主营产品:Dielectric Loss Tester、Transformer Ratio测试仪、Loop Resistance Tester、高压None线核相仪、Insulation Resistance Tester、Partial Discharge Tester、Cable Fault Tester、DC Resistance Tester等。
☎ Phone: 18952707000(关经理)📞 Landline: 0514-88770377✉ Email: 195214804@qq.com
Verification Code
By submitting, you agree to ourTerms of ServiceandPrivacy Policy
🏠 网站Home📞 一键拨号✉ Contact Us