Switchgear Transient Earth Voltage Partial Discharge Tester - Yangzhou Darui

Published: 2024-07-01 12:39:28

Category: Partial Discharge Tester

Product Description

Switchgear Transient Earth Voltage Partial Discharge Tester

Darui Electric recommends for you:

GHPD1002Switchgear Transient Earth Voltage Partial Discharge Tester is a handheld portable detection instrument specially developed by our company for detecting the insulation status of switchgear.，The instrument uses imported sensors and a large number of imported components, greatly improving detection accuracy and response speed. The instrument has two detection modes: ultrasonic and transient earth voltage. Holding the handheld device close to medium and high voltage switchgear can simply and intuitively detect potential partial discharge activities in the switchgear. Regular use of the Switchgear Transient Earth Voltage Partial Discharge Tester to inspect switchgear in operation can effectively identify fault risks and promptly perform maintenance to avoid failures.

GHPD1002Switchgear Transient Earth Voltage Partial Discharge TesterTechnical Specifications

TEV Sensor

Measurement Range	0-60dB
Measurement Bandwidth	3-100MHz
Accuracy	±1dB
Maximum Pulses per Cycle	1000
Minimum Pulse Count Level	1

Ultrasonic Sensor

Measurement Range	-7dB~60dB
Resolution	1dB
Accuracy	±1dB
Sensitivity	-61dB
Center Frequency	40.0±1.0KHz
Bandwidth	2.0KHz

Battery

Built-in Battery	Lithium battery, 8.4V, 1800mAh
Usage Time	Approximately 6 hours
Charging Time	Approximately 5 hours
Battery Protection	Overvoltage and overcurrent protection

Battery Charger

Rated Voltage	8.4V
Charging Output Current	1A
Operating Temperature	10℃-60℃
Operating Humidity	<80%

Hardware

Enclosure	Single-color molded plastic
Screen	240*320 TFT LCD display
Controls	6x buttons
Interfaces	Micro USB port; charger port; headphone jack; external wave concentrator interface
Headphones	High-fidelity noise-canceling headphones

Dimensions

Instrument Dimensions	178mm×75mm×30mm
Instrument Weight	0.25KG
Case Dimensions	415mm×330mm×170mm
Case Weight	2.3KG
Total Equipment Weight	2.7KG

Operating Environment

Operating Temperature	-20℃~50℃
Ambient Humidity	0-90%RH
IP Rating	54

Note: The above information and technical parameters are compiled and released by Yangzhou Darui Electric Co., Ltd.

← Previous
TEV Partial Discharge Tester Quotation - Yangzhou Darui Next →
Ultrasonic Distribution Line Inspection Instrument Manufacturer - Yangzhou Dary

Product Details