Ultrasonic Distribution Line Inspection Instrument Manufacturer - Yangzhou Dary

Published: 2024-07-01 12:39:27

Category: Partial Discharge Tester

Product Description

Ultrasonic Distribution Line Inspection Instrument Manufacturer

Dary Electric recommends:

Ultrasonic Distribution Line Inspection Instrument Manufacturer produces using precision high-frequency ultrasonic sensors, collecting and selecting characteristic sound waves emitted during faults in power grids of 110KV and below. Through filtering and comparison, it ultimately achieves defect judgment. This fundamentally solves the live inspection problem of power grids, especially distribution networks. It supports low-speed vehicle-mounted inspection.

The inspection instrument supports real-time communication with mobile phones and tablets, and can synchronize collected real-time data to the cloud, truly achieving front-end detection and back-end viewing and analysis.

Ultrasonic Distribution Line Inspection InstrumentTechnical Parameters

Ultrasonic Sensor

Measurement Range	-7-60dB
Resolution	1dB
Accuracy	±1dB
Center Frequency	40.0±1.0kHz
Sensitivity	-65dB
Bandwidth	2.0kHz

Battery

Built-in Battery	Lithium battery, 8.4V, 3500mAh
Usage Time	Approximately 8 hours
Charging Time	Approximately 6 hours
Battery Protection	Overvoltage and overcurrent protection

Charger

Rated Voltage	8.4V
Charging Output Current	2A
Operating Temperature	10℃-60℃
Operating Humidity	<80%

Hardware

Housing	Single-color molded plastic
Screen	Wireless display (Android phone or tablet)
Control	Start/Stop button
Indicator Light	4 digits
Interface	Charger interface; wired headphone interface
Headphones	High-fidelity noise-canceling wired headphones; wireless Bluetooth headphones

Software

System	Android 8.0.0
Memory	4.0GB
Function	Data display, chart display
Storage	64GB
Photography	Supported
Positioning	Supported

Dimensions

Instrument Dimensions	380mm×30mm
Instrument Weight	0.5KG
Case Dimensions	415mm×330mm×170mm
Case Weight	2.3KG
Total Equipment Weight	3.0KG

Working Environment

Operating Temperature	-20℃~50℃
Ambient Humidity	0-90%RH
IP Rating	54

Note: The above information and technical parameters are compiled and released by Yangzhou Dary Electric Co., Ltd.

← Previous
Switchgear Transient Earth Voltage Partial Discharge Tester - Yangzhou Darui Next →
Ultrasonic Partial Discharge Inspector - Yangzhou Darui

Product Details