Overview:
The SDLJ-83 Lightning Counter Calibration Instrument is meticulously designed and developed by our company's technical personnel based on the needs of power users.With an attractive appearance and convenient portability, it replaces traditional bulky testing instruments and methods, and is used for action tests such as resetting the pointer of lightning arresters at 35kV and below to zero.
It is widely welcomed by professionals.
Technical Specifications:
·Dimensions: φ36×375, with head of φ50×100
·Weight: 780g
·Power Supply: DC 6V (four No. 1 dry batteries)
·Output Voltage: 800~1600V
Precautions: Before each use, ensure that there is no high voltage on the high-voltage side (red light is not on) before pulling out the instrument antenna. After the test, turn off the power first, then discharge the head conductive rod to the tail ground wire before storing the instrument.
Usage Guide:
The power switch is located between the body and the head. Rotate it 90 degrees in any direction; a "click" sound indicates the power is on, and the opposite indicates off. Before use, insert the ground wire into the tail and connect it to the ground. According to the height of the counter, pull out the head telescopic conductive rod to an appropriate length before turning on the power. After turning on the power, the green light will be on; when the red light comes on (about 3 to 8 seconds), you can test the lightning arrester counter through the head telescopic conductive rod. The instrument can be tested repeatedly without turning off the power (the conductive rod should be away from the test object during each charging). The instrument uses four No. 1 batteries, providing more than 2000 discharge tests. If the battery is low, the charging time will be extended, and the batteries should be replaced promptly. Suggestion: If not used for a long time, remove the dry batteries from the instrument!
