Three-Phase Power Lightning Counter Instruction Manual
Darui Electric recommends:
Three-Phase Power Lightning Counter Instruction Manual
1. Please charge the device before use. To ensure charging effectiveness and extend battery life, use the dedicated charger. It takes about 3-4 hours to fully charge an empty battery. The red light on the charger indicates charging; the green light indicates charging is complete.
2. According to the installation height of the counter, appropriately extend the telescopic discharge rod.
3. For the dedicated grounding wire, insert one end's plug into the jack at the rear of the calibrator, and connect the other end's clip to the ground.
4. Press the red button to activate high voltage for about 1 second. The indicator light will turn on (with a slight flicker),
then gently tap the connection end between the counter and the arrester for testing.
5. After each tap, the tip of the discharge rod should be removed from the counter. If repeated testing is needed, do not release the button. Wait 1-2 seconds until the indicator light flickers again, then tap again for testing.
6. Continuous testing may cause the calibrator to heat up. Please allow appropriate intervals to reduce malfunctions and extend battery life.
7. The calibrator output has three levels: high, medium, and low, adjustable via the toggle switch on the head to suit testing different types or brands of counters.
Three-Phase Power Lightning Counter
Product Specifications:
1. Output Voltage: 0～1200V adjustable
2. Capacitance: 10μF
3. Action Time: 1~2 seconds/time
4. Power Supply: DC 1.5V X 8 cells
5. LCD Display: 9V
6. Dimensions: 200×115×45mm
Shoulder-strap shockproof protective cover
Instructions are printed directly inside the cover flap
Discharge function: After high-voltage charging, if not used for two minutes, the high voltage is automatically released
Strong universality: Suitable for various types of lightning counters
Easy and safe operation: Press the test button to automatically complete the charge-discharge process.
Technical Specifications
Output Voltage: 0～1200V adjustable; Capacitance: 10μF
Action Time: 1~2 seconds/time; Power Supply: DC 4.5V * 2 blocks
LCD Display: 9V; Dimensions: 200×115×45mm
Technical Parameters
|
Product Name
|
Lightning Counter
|
| |
|
|
Working Voltage Un
|
AC220V
|
|
Action Current
|
≧1KA
|
|
Counting Times
|
0-99
|
|
Data Acquisition
|
Inductive, mutual inductance sampling
|
|
Housing Material and Color
|
Flame-retardant reinforced PC (light gray)
|
|
Dimensions (d×w×h)/P
|
90×36×66
|
|
Mounting Bracket
|
Note: The above information and technical parameters are compiled and released by Yangzhou Darui Electric Co., Ltd.
