1. Portable design with small size and light weight;
2. Telescopic electrode adjustable in length according to height;
3. Dual AC/DC power supply with built-in rechargeable battery, one charge lasts up to six months;
4. Strong anti-interference capability;
5. Maximum voltage up to 1500V.
Functional Features
1. Please charge before use. To ensure charging effectiveness and extend battery life, use the dedicated charger. It takes about 3-4 hours to fully charge an empty battery. The red light on the charger indicates charging is in progress.
2. According to the installation height of the counter, properly extend the telescopic discharge rod.
3. For the dedicated grounding wire, insert one end's plug into the jack at the rear of the calibrator, and connect the other end's clip to the ground.
4. Press the red button to activate high voltage for about 1 second. When the indicator light turns on (with a slight flicker), gently tap the connection end between the counter and the arrester for testing.
5. After each tap, the discharge rod tip should be removed from the counter. If repeated testing is needed, do not release the button. Wait 1-2 seconds until the indicator light flickers again, then tap again for testing.
6. Continuous testing may cause the calibrator to heat up. Please allow appropriate intervals to reduce malfunctions and extend battery life.
7. The calibrator output has three levels: high, medium, and low, adjustable via the toggle switch on the head to accommodate different types or brands of counters.
8. If the indicator light does not flicker after pressing the button for more than 3 seconds, the battery needs charging.
9. Do not disassemble the calibrator arbitrarily.
Note: The above information and technical parameters are compiled and released by Yangzhou Dary Electric Co., Ltd.