Darui Electric recommends:
Telescopic Pocket Lightning Counter Tester Product Keywords: Lightning counter calibrator, lightning counter tester, rod-type lightning counter calibrator, arrester discharge counter tester, pocket lightning counter tester, lightning counter calibrator, lightning counter action tester. The telescopic pocket lightning counter tester is carefully designed and developed by our company's technical personnel based on the needs of power users. The product has an attractive appearance and is convenient to carry and use. It replaces traditional bulky testing equipment and methods, and is well received by professionals.
Usage Instructions:
1. Charge before use. To ensure charging effectiveness and extend battery life, use the dedicated charger. It takes 3-4 hours to fully charge an empty battery. A red light on the charger indicates charging; a green light indicates charging is complete. Before use, connect the attached ground wire plug to the tail end, and connect the ground clip to the earth.
2. According to the installation height of the counter, appropriately extend the telescopic discharge rod.
3. Press the red button to turn on high voltage for about 1 second. The indicator light will illuminate (with a slight flicker). Then gently tap the connection end between the counter and the arrester for testing.
4. After each tap, the tip of the discharge rod should be moved away from the counter. If repeated testing is needed, you do not need to release the button. After about 1-2 seconds, when the indicator light flickers again, you can tap again for testing.
5. Continuous testing may cause the tester to heat up. Please allow appropriate intervals.
6. If the indicator light does not flicker after pressing the button for more than 3 seconds, the battery needs to be charged.
7. Do not disassemble the tester arbitrarily. If the battery capacity significantly decreases or charging efficiency is too low, it needs to be replaced. Please purchase the dedicated battery pack from our company.
Note: When the indicator light is on (with a slight flicker), do not touch the electrode parts with any part of the body, otherwise there is a risk of electric shock.
Note: The above information and technical parameters are compiled and released by Yangzhou Darui Electric Co., Ltd.
