Product Details

Cable Live Line Identifier Function Introduction

Host dimensions: 400mm×270mm×210mm 

Receiver dimensions: 155mm×205mm×50mm 

DLSBCable Identifier host functions are as follows: 

1. Power switch: Controls the power on/off of the entire unit. 

2. Power input socket: Use the dedicated power cord provided with the instrument to input 50Hz, 220V AC power. When in use, the instrument should use a three-hole power socket independently, and the socket's ground wire should be directly connected to the ground nearby. 

3. Fuse holder: The instrument uses a 10A fuse; when damaged, replace with the same specification fuse. 

4. Black binding post: During testing, insert the matching black test lead (Ф4 plug) into this jack, and connect the other end's test clip to the system ground. 

5. Red binding post: During testing, insert the matching red test lead (Ф4 plug) into this jack, and connect the other end's test clip to the cable core under test. 

6. Meter: Indicates the output current level. 

7. Output adjustment: Used to adjust the host current; adjust appropriately based on the length of the cable under test and the receiver indication. Rotate clockwise to increase the output current. 

Receiver functions are as follows: 

1. Power switch: Turns the receiver power on and off. 

2. Amplitude adjustment: Rotate clockwise to increase the receiver meter reading, counterclockwise to decrease. 

3. Meter: Indicates the input signal amplitude and polarity. 

4. Power indicator: Lights up when the power switch is turned on.