Product Details

Cable Fault Locator is mainly developed by our company for accurate cable fault point location. It has high anti-interference and high sensitivity. This instrument combines low-noise design with high-performance digital filters, using FIR filters, and integrates multiple working modes such as acoustic-magnetic synchronous point location and step voltage, providing more ways for accurate cable fault point location. With a 4.3-inch high-brightness OLED color LCD, it is clearly visible outdoors. The intuitive and simple graphical display and one-key operation mode allow accurate and rapid point location of various cable faults.

[Functional Features]

1. The data display part uses a high-brightness 4.3-inch OLED color LCD, making the display interface clearer.

2. The function and parameter adjustment part uses a one-key programmable pulse encoding keyboard, making the operation panel more concise and operation more convenient.

3. This instrument collects and displays the waveform of the audio part in real time. By observing the repetitive waveform characteristics and the distance axis, the distance to the fault point can be roughly observed, and the operator is less prone to fatigue when observing waveforms.

4. In the acoustic-magnetic point location mode, there are single and continuous modes. If the discharge frequency is too fast and the gap time is too short, the user can select the single mode to carefully analyze the waveform and related data of one discharge, and waveform page turning is supported in single mode.

5. Four filter frequency bands are used in acoustic signal acquisition: low frequency band, medium frequency band, high frequency band, and full frequency band. Users can choose according to the actual situation on site.

6. The step voltage part uses waveform display and continuously samples and refreshes the signal, enhancing the user's analysis of signal continuity and resolution of sudden jump signals.

7. The step voltage part has multiple gear subdivisions. During adjustment, large signals are automatically attenuated to ensure that when the maximum voltage amplitude within the test range is input, the displayed signal is not clipped.

8. The audio part filtering uses FIR digital filtering technology, making the characteristic frequency bands more obvious and the filtering performance better.

9. The distance to the fault point can be displayed within the range of 0-25m.

10. In continuous mode, compressed waveforms within 15m distance can be displayed; in single mode, waveforms within 15m distance can be expanded for analysis.

[Technical Parameters]

1. 84dB maximum volume limit

2. Display fault distance, maximum 25m

3. Audio test accuracy 0.1m

4. Audio waveform display (15m)

5. Electromagnetic intensity display: rectangular bar display, digital display, maximum value recording function

6. Automatic detection of pulse signals

7. Step voltage waveform display

8. Step voltage multi-gear gain adjustment

9. Display: 4.3-inch high-brightness OLED display, resolution 480×272

10. Continuous use time about 7 hours

11. Audio gain greater than 110dB

12. Frequency range: 100Hz---1500Hz

13. Low-pass: 100---400Hz  Band-pass: 150---600Hz  High-pass: 200---1500Hz

14. Step voltage sensitivity: 0.1mV---75V

15. Interference isolation: 50Hz, DC

16. Dimensions: 240mm×130mm×120mm

17. Weight: ≤1.4kg

18. Battery: 12 rechargeable batteries

[Functions and Features]

1. Can test high and low resistance faults of all cables up to 35KV, with wide adaptability.

2. User-friendly software and full Chinese menu. Key definitions are simple and clear. Measurement methods are simple and fast.

3. The success rate of fault detection, test accuracy, and ease of testing are superior to any domestic testing equipment.

4. 8-inch color LCD touch screen as the display terminal, the instrument has strong data processing capabilities and a friendly display interface.

5. Has sampling high-voltage protection measures. The test instrument will not crash or be damaged in an impulse high-voltage environment.

6. Has a computer communication interface, making it easy to save data and graphics in the computer.

7. No test blind spots.

8. Built-in power supply, can test open circuit and low resistance short circuit faults of cables in environments without power.

[Main Performance Indicators]

1. Test methods: low voltage pulse method, high voltage flashover method;

2. Impulse high voltage: below 35KV power cables;

3. Data sampling rate: 100MHz, 50 MHz, 25MHz, 12.5 MHz;

4. Test distance: >30Km;

5. Reading resolution: less than 1m;

6. System test accuracy: less than 50cm;

7. Test cable pulse width settings: "0.05", "0.1", "0.2", "0.5", "1", "2", "8" microseconds;

8. Has test waveform storage function: can store waveforms tested on site in the instrument in a specified order for convenient recall and observation at any time. Can store a large number of field test waveforms;

9. Can display the measured fault point waveform and the full-length open circuit waveform of the good phase on the screen simultaneously for same-screen comparison and overlay comparison, and can automatically determine the fault distance;

10. Built-in power supply: after fully charged, the instrument can work continuously for more than 3 hours, and can also work with external AC power;

11. Working conditions: temperature -10℃ to +45℃, relative humidity 90%.

High voltage signal unit: ultra-light high-frequency high voltage signal generator

[Functions and Features]

1. Has voltage adjustment and automatic voltage stabilization functions.

2. Uses switching power supply electronic boost. Small size, light weight.

3. Has open circuit and short circuit automatic protection functions.

4. Output voltage display is a color LCD compass-style dynamic display.

5. Complete and reliable functions, simple wiring.

6. The box is made of engineering plastic insulating material.

[Main Performance Indicators]

1. Output voltage: ≤36KV negative DC

2. Working voltage: 220V±10% 50Hz

3. Display voltage error: <±2%

4. Output current: ≤40mA

5. Working temperature: -10℃ to 50℃

6. Working humidity (relative): ≤80%

7. Discharge energy: ≤1200J/5S (standard with 4μF external capacitor, customizable)

8. Minimum discharge cycle: 3 seconds

9. Maximum power: <1.5KVA

10. Altitude: below 3000 meters

11. Dimensions: 43cmx38cmx23cm

12. Weight: 11kg

Power intelligent Cable Fault Tester matching composition diagram:

Note: The above product information and technical parameters are compiled and released by Darui Company for you.