Loop Resistance Tester with Printing Main Technical Parameters:



1. Test Current: 100A, 200A,



2. Test Range: 100A-200A  0-9999.9u?



3. Accuracy: 0.5%+2 digits;



4. Display: Loop resistance 5-digit display with resolution of 0.1 uΩ and latch function; Test current 4-digit display;



5. Working Mode: Continuous;



6. Power Supply: 220V±10%, 50Hz;



7. Weight: Not more than 4kg for 100A; Not more than 6kg for 200A;



  QK200ALoop Resistance Tester with Printing has two measurement modes: traditional pulse mode and arc burning mode required by new standards. Pulse mode: single measurement or three consecutive measurements with automatic calculation of average value. Arc burning mode: default time options are 15 seconds, 30 seconds, 60 seconds, and can be customized between 0-60S according to actual measurement requirements.



 



Loop Resistance Tester with Printing Overview:



1. Test current is automatically stabilized without manual adjustment;



2. New anti-power frequency interference design ensures accurate measurement in strong power frequency interference environments;



3. Uses potentiometer measurement principle with synchronized high-speed data sampling, completely eliminating the influence of test current fluctuation on instrument accuracy;



4. Simple operation: just press the test button to obtain the measured loop resistance value and test current value;



5. Loop resistance value is automatically latched for easy viewing and recording;