Currently, in the measurement of contact resistance in power systems, the conventional QJ44 double-arm DC bridge is commonly used, but its test current is only at the mA level, making it difficult to detect defects such as reduced cross-sectional area of circuit conductors. When measuring the contact resistance of high-voltage switch conductive circuits, due to the influence of oil film and oxide layer between contacts, the measured value is several times larger, failing to truly reflect the contact resistance value. For this reason, the Ministry of Electric Power standard SD301—88 "Regulations for Handover and Preventive Tests of AC 500KV Power Equipment" and the new edition of "Regulations for Preventive Tests of Power Equipment" stipulate that the measurement current for contact resistance of circuit breakers and disconnecting switches should not be less than DC 100A, to ensure accurate test results.

HLY-200A Loop Resistance Tester is designed based on the latest power industry implementation standard DL/T845.4-2004 of the People's Republic of China, combining high-frequency switching power supply technology and digital circuit technology. It is suitable for measuring the loop resistance of switch control equipment. Its test current adopts DC 100A and 200A recommended by national standards. The loop resistance can be directly measured at a current of 100A, and also at 200A, with the final test results displayed digitally. This instrument provides accurate measurement and stable performance, meeting the requirements for on-site high-voltage switch maintenance in power and power supply departments and loop resistance testing in high-voltage switch factories.

Performance Features


1. High Current: Using the latest power supply technology, it can continuously output high current for a long time, overcoming the drawbacks of instantaneous current in pulse power supplies, effectively breaking through the oxide film on switch contacts, and obtaining good test results.

2. Strong Anti-interference Capability: Under severe interference conditions, the last digit of the LCD screen can stabilize within ±1 digit, with stable readings and good repeatability.

3. Long Service Life: All high-precision resistors are used, effectively eliminating the influence of ambient temperature on measurement results, and the use of military-grade connectors enhances vibration resistance.

4. Easy to Carry: Small size and light weight.

Technical Specifications


1. Measurement Range: 1～1999μΩ.

2. Resolution: 1μΩ.

3. Test Current: DC 50A, 100A, 150A, 200A four fixed outputs.

4. Measurement Accuracy: 0.5%±1d.

5. Working Mode: Continuous.

6. Display Mode: Three and a half digit LCD.

7. Power Supply: AC220V±10% , 50Hz.

8. Working Environment: Temperature -10℃～40℃, Humidity ≤80 %RH.

9. Dimensions: 380mm×350mm×260mm.

10. Weight: 5kg (excluding accessories).