Detailed Introduction of GKC-F High Voltage Switch Mechanical Characteristics Tester




GKC-F High Voltage Switch Mechanical Characteristics Tester

Switch Mechanical Characteristics Tester, High Voltage Switch Dynamic Characteristics Tester, High Voltage Switch Characteristics Tester, Mechanical Characteristics Tester, Circuit Breaker Mechanical Characteristics Tester, High Voltage Switch Tester Switch Characteristics Tester, High Voltage Switch Comprehensive Tester, Generator Characteristics Tester, Transformer Characteristics Tester




Refer to the power industry standard "General Technical Conditions for High Voltage Test Equipment" Part 3, DL/T846.3-2004 High Voltage Switch Comprehensive Test as the design basis. It can accurately measure the mechanical dynamic characteristic parameters of various voltage levels of low-oil, multi-oil, vacuum, SF6 and other high voltage circuit breakers.
    Technical Parameters
    Environmental group: Belongs to Group III instruments in GB6587.1-1986 "General Outline of Environmental Tests for Electronic Measuring Instruments" (i.e., can be used outdoors).
    1. Dimensions and Weight:
       Main unit: 440×300×150 (mm)   5 (kg)
       Accessories: 440×300×80 (mm)    3 (kg)
    2. Working Power: AC220V±10%
    3. Frequency: 50Hz±5%
    4. Ambient Temperature: -10℃～40℃
    5. Relative Humidity: ≤85%
    6. Insulation Resistance: ≤2MΩ
    7. Dielectric Strength: The power input line to the casing can withstand a voltage test of 1.5kV for 1 minute
    8. Time Test Range: 0～999.9ms         Resolution: 0.01ms    Accuracy ≤0.1ms
    9. Speed Test Range: 15m/s              Resolution: 0.01m/s   Accuracy ±1% of reading + 2 digits
    10. Travel Test Range: Unlimited              Resolution: 0.01mm    Accuracy ±1% of reading + 2 digits
    11. DC Power Selection Range: 25-265V/10A   Resolution: 1V        Accuracy ≤±1%