1. Large LCD Chinese Display

The instrument is equipped with a large screen (105mm×65mm) Chinese menu interface. The screen is divided into left and right parts: the left side is the function menu area, and the right side shows relevant status information prompts. Every step is very clear, and operators can use it without professional training. With one operation, the microcomputer automatically completes the entire measurement process, making it a very ideal dielectric loss measurement device.

2. Massive Data Storage

The instrument is equipped with a calendar chip and large-capacity storage, which can save test results in chronological order. Historical records can be viewed at any time and printed out.

3. Scientific and Advanced Data Management

Instrument data can be exported via USB drive, and can be viewed and managed on any PC using our company's dedicated software, and work reports can be generated.

4. Multiple Test Modes

The instrument can perform tests using internal high voltage, external high voltage, internal standard, external standard, positive connection method, reverse connection method, self-excitation method, and other methods. Under external standard and external high voltage conditions, it can perform high voltage (greater than 10kV) dielectric loss tests.

5. One-Step CVT Testing

The instrument can also test fully sealed CVT capacitor voltage transformers (dielectric loss and capacitance of C1 and C2, achieving simultaneous testing of C1 and C2. It can also test CVT ratio and voltage angle difference.

6. High-Speed Signal Sampling

The inverter and sampling circuits inside the instrument are fully digitally controlled, and the output voltage is continuously adjustable.

7. Multiple Protections for Safety and Reliability

The instrument has multiple protection measures such as input voltage fluctuation, output short circuit, overvoltage, overcurrent, and temperature, ensuring the safety and reliability of the instrument. The instrument also has a grounding detection function to ensure that ungrounded equipment is not allowed to boost voltage.