Many activities for contracting, repairing, and testing electric power facilities
In China, those engaged in contracting, repairing, and testing electric power facilities shall obtain a license in accordance with the provisions of the "Measures for the Administration of Licenses for Contracting (Repairing, Testing) Electric Power Facilities". Unless otherwise stipulated by the State Electricity Regulatory Commission, no unit or individual may engage in contracting, repairing, or testing electric power facilities without obtaining a license. The license for contracting (repairing, testing) electric power facilities is a qualification certificate issued by the State Electricity Regulatory Commission to enterprises that can perform installation of new equipment, equipment maintenance and care, and preventive testing of equipment. Units that have obtained the license carry out activities in accordance with the law and are protected by law.
The grades of licenses for contracting (repairing, testing) electric power facilities are divided into Level 1, Level 2, Level 3, Level 4, and Level 5. Only those who have obtained qualifications at each level can engage in contracting, repairing, and testing electric power facilities at that level.
Enterprises applying for the qualification of contracting (repairing, testing) electric power facilities license must meet certain conditions, such as registered capital, equipment requirements, personnel requirements, technical requirements, etc. Among them, the difficulties and pain points for enterprises applying for the qualification license for the first time are:
1. For the first application for the contracting (repairing, testing) electric power facilities license, purchasing electric power test equipment and tools requires a large investment;
2. The electric power test equipment and tools specified in the contracting (repairing, testing) electric power facilities license are numerous, with many technical requirements, making it difficult to guarantee product quality and after-sales service;
3. Due to the turnover of electric power testing personnel, there are difficulties in training personnel to skillfully use electric power test equipment.
Our company, in order to solve customers' urgent needs, provides one-stop services for the industry's contracting (repairing, testing) electric power qualification.
One-stop services for electric power qualification include: agency for contracting (repairing, testing) qualification, technical consultation for contracting (repairing, testing) qualification, supply of electric power test equipment for contracting (repairing, testing), upgrading of electric power test equipment for contracting (repairing, testing), leasing of electric power test equipment for contracting (repairing, testing), and training for electric power testing for contracting (repairing, testing), and other full services.
|
Level 1 for Testing |
|
|
DC High Voltage Generator |
DC：300kv/5mA |
|
Power Frequency Withstand Voltage Test Device |
AC：10kvA/100KV |
|
Power Frequency Withstand Voltage Test Device |
AC:5KVA/50KV |
|
Variable Frequency Series Resonance Test Complete Set |
4000KVA/800KV/5A,30-300HZ |
|
Partial Discharge Complete Set |
Power supply above 400KW with frequency greater than 100HZ |
|
Induction Withstand Voltage Test Device |
5KVA/360V 150HZ |
|
High Voltage Dielectric Loss Tester |
1. Dielectric measurement accuracy is 1% 2. Capacitance accuracy is 0.5% 3. Anti-interference frequency conversion |
|
Loop Resistance Tester |
DC:≥100A |
|
Transformer Volt-Ampere Characteristic Tester |
2200v/1A |
|
Transformer Volt-Ampere Characteristic Tester |
1100V/5A |
|
Ground Resistance Tester |
Current transformer method ＞3-20A |
|
Ground Resistance Tester |
Heterodyne method |
|
Capacitance and Inductance Tester |
1 unit |
|
Precision Current Transformer |
Class 0.2 |
|
Precision Voltage Transformer |
Class 0.2 |
|
Ground Continuity Tester |
DC:1A |
|
Transformer DC Resistance Tester |
DC:≥10A |
|
Transformer Ratio Tester |
Digital type Class 0.5 |
|
Transformer Winding Deformation Tester |
Frequency response method |
|
On-load Tap Changer Tester |
I≥1A |
|
Circuit Breaker Characteristic Tester |
2 units |
|
Zinc Oxide Arrester Resistive Current Tester |
1 unit |
|
Three-phase Relay Protection Tester |
Three-phase voltage and current each 2 groups |
|
Transmission Line Parameter Tester |
Heterodyne method |
|
High Current Test Complete Set |
1 unit |
|
Online Current Monitoring Ammeter Calibrator |
1 unit |
|
Lightning Counter Calibrator |
1 unit |
|
Insulation Resistance Tester |
DC:0-10000V 200GΩ short circuit current greater than or equal to 5mA |
|
Transmitter Calibrator |
2 sets |
|
Gas Relay Calibration Device |
1 set |
|
SF6 Leak Detector |
Sensitivity 1ppmv |
|
SF6 Gas Moisture Tester |
|
|
SF6 Gas Density Calibrator |
Accuracy class 0.2, pressure range 0-1.0MPa |
|
Insulating Oil Particle Size Tester |
1 unit |
|
Insulating Oil Chromatograph |
1 unit |
|
Insulating Oil Closed Cup Flash Point Tester |
1 unit |
|
Insulating Oil Moisture Meter |
Ppm level |
|
Insulating Oil Acid Value Tester |
1 unit |
|
Insulating Oil pH Tester |
1 unit |
|
Insulating Oil Automatic Dielectric Loss Tester |
1 unit |
|
Insulating Oil Dielectric Strength Tester |
1 unit |
|
← Previous
Series Variable Frequency Resonant Test Device Next → Zinc Oxide Arrester Resistive Current Tester Product Introduction  | |