High Voltage Switch Dynamic Characteristic Tester Uses * Measure the volt-ampere characteristics of linear resistive elements;
* Measure the forward and reverse volt-ampere characteristics of ordinary diodes;
* Measure the forward and reverse volt-ampere characteristics of Zener diodes;
* Measure the volt-ampere characteristics of small bulbs.
Technical Parameters and Features
* DC regulated power supply: two ranges of 2V and 20V available, continuously adjustable, with 3.5-digit digital display;
* Voltage display: range 0-200V, 3.5-digit digital display;
* Current display: four ranges of 200uA, 2mA, 20mA, 200mA available, 3.5-digit digital display;
* All use national standard connectors for manual wiring, which can cultivate hands-on ability.
High Voltage Switch Dynamic Characteristic Tester Also known as:
High voltage switch dynamic characteristic tester, switch mechanical characteristic tester, high voltage switch comprehensive tester, circuit breaker dynamic characteristic tester, circuit breaker mechanical characteristic tester, circuit breaker comprehensive tester, high voltage switch time characteristic tester, high voltage switch characteristic tester, switch characteristic tester, circuit breaker tester, switch mechanical characteristic tester,
Main Uses: Suitable for mechanical characteristic testing of high voltage circuit breakers from imported and domestic manufacturers, including multi-oil, low-oil, SF6, vacuum, etc. Also suitable for time testing of electromagnetic action appliances (such as contactors, relays, etc.).
Main Features: The instrument has a built-in DC operating power supply, and can flexibly use an external operating power supply or external synchronization trigger. Large screen LCD display, with preset typical switch speed definitions; can switch time waveform diagram to display 1 channel of close/open command, 12 channels of time jumps; S-T graphic display of close/open motion curves, with dynamic analysis and calculation; V-S curve for intuitive observation of motion speed; I-T curve to observe the action process of the electromagnet. Microcomputer printer prints data for retention. The instrument can save 255 test records, and can communicate with a computer; the data management software can analyze, correct, and print test reports. The accessory box is equipped with sensors such as 0.1mm, 1mm linear, 1-degree angle photoelectric auxiliary contacts, and a full set of accessories including test wires, speed measurement mounting brackets, etc.
