The high current generator is essential equipment for power maintenance departments
It is essential equipment for places requiring high current in electrical debugging across various industries. It is applied in power plants, substations, electrical appliance manufacturing plants, and scientific research and laboratory units. It belongs to short-time or intermittent duty systems; increasing the current-carrying time can improve work efficiency and expand the testing range. It features small size, light weight, good performance, and convenient use and maintenance.
The high current generator is essential equipment for places requiring high current in debugging within the power and electrical industries. This device has the characteristics of convenient use and maintenance, superior performance, safe and reliable use, beautiful appearance, sturdy and durable construction, and easy mobility. It is essential equipment for power supply enterprises, large factories, metallurgy, power plants, railways, and other power maintenance departments. It adopts advanced microelectronic processing technology, all processes can be set in advance, with a full Chinese interface and simple and clear operation. After setting all test items, tests are automatically performed without manual intervention. Through structural, electrical performance, material, and process optimization upgrades; it can improve current-carrying time, current stability, and volume-weight-to-power ratio.
The high current generator uses imported high magnetic permeability materials, with exquisite design, featuring small size, strong electric dynamic resistance, and convenient use. This series of high current generators is essential equipment for places requiring high current in electrical debugging across various industries. It is suitable for current load tests and temperature rise tests of 50HZ switches, current transformers, and other electrical equipment. After power failure, tests can be continued without resetting to zero and adjusting again.
Usage and maintenance of the high current generator
1. Check whether the main circuit wiring terminals are loose and whether the voltage regulator brush is in good contact.
2. If not used for a long time, before use, use a 500V megohmmeter to check the insulation resistance of the main circuit to ground, which should not be less than 0.5 megohms.
3. The input voltage should conform to the voltage value indicated on the nameplate, with a tolerance of ±10%, and a frequency of 50HZ.
4. The current gear switch is not allowed to operate under load.
5. During operation, rotate the handwheel evenly and slowly to avoid damaging the voltage regulator.
6. At full load, the working time should not exceed 5 minutes, and the continuous working time should be less than 2.5 minutes, but the working cycle should be greater than 10 minutes.
7. The current generator casing has a grounding terminal, and it should be properly grounded during use.
